Overview
iRig Pro Quattro I/O is a professional-quality 4 in/2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, including essential extras like an XY pair of microphones for recording, travel bag, windscreen, and more.
Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA, and TRS inputs; plus XLR balanced, 3.5mm stereor and headphone outputs - and full MIDI I/O!
iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone AD/DA converter, mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.
Best of all, iRig Pro Quattro Deluxe includes 2 high-quality mic capsules that plug into the front of the unit in an XY configuration, turning Quattro into a powerful field recorder while leaving 2 additional inputs free!
Packed with a swiss-army-knife's worth of tools and accessories, iRig Pro Quattro I/O Deluxe ensures you're ready for anything, anywhere:
• As a mobile interface
Conneted to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need.
• As a broadcast/podcast interface
Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favorite videos easily.
• As a field recording interface
With an onboard microphone and included XY stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, or Android device into a full-featured, professional field recorder. Best of all, in STEREO and MONO modes inputs 3 and 4 mirror inputs 1 and 2 but reduced by 12dB, giving you a back-up in case the main inputs clip unexpectedly. iRig Pro Quattro I/O Deluxe includes: iRig Pro Quattro I/O, 1/4″ thread adaptor, 2x iRig MIC XY stereo microphones, carrying case, PSU and all related cables.
Specs
iRig Pro Quattro I/O Specifications
Microphone Inputs 1-2
- 2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Input impedance: 1 kOhms
- Input level, min gain: 0 dBFS is obtained with a -1.5 dBu signal at the XLR input
- Input level, max gain: 0 dBFS is obtained with a -55 dBu signal at the XLR input
- Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
- Dynamic Range: 103 dB(A), min gain
- Phantom power: 48V / -4V
Built-in microphone
- Type: MEMS
- Polar pattern: omnidirectional
- Frequency response: from 30 Hz to 20 kHz
- Max SPL: 110 dBSPL
- Sensitivity: -41.5 dB (1 kHz, 94dB SPL)
Instrument Inputs 1-2
- 2 x unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
- Input impedance: 1 MOhms
- Input level, min gain: 0 dBFS is obtained with a +10 dBu signal at the TS input
- Input level, max gain: 0 dBFS is obtained with a -43 dBu signal at the TS input
- Frequency response: from 7 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
- Dynamic range: 103 dB(A), min gain
Microphone Inputs 3-4
- 2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Input impedance: 1 kOhms
- Input level, min gain: 0 dBFS is obtained with a -3 dBu signal at the XLR input
- Input level, max gain: 0 dBFS is obtained with a -54 dBu signal at the XLR input
- Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
- Dynamic range: 101 dB(A), min gain
- Phantom power: 48V / -4V
Line Inputs 3-4 (balanced)
- 2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Input impedance: 1 kOhms
- Input level, min gain: 0 dBFS is obtained with a -3 dBu signal at the XLR input
- Input level, max gain: 0 dBFS is obtained with a -54 dBu signal at the XLR input
- Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
- Dynamic range: 101 dB(A), min gain
- Phantom power: 48V / -4V
Line Inputs 3-4 (unbalanced)
- Unbalanced, TRS 3.5 mm stereo Jack and RCA
- Input impedance: 2.1 kOhms
- Nominal input level: -3.5 dBV (-10 dBV with 6.5 dB of headroom)
- Frequency response: from 16 Hz to 46 kHz within 3 dB (96 kHz sample rate)
- Dynamic range: 93 dB(A)
Line Outputs (balanced)
- 2 x balanced, 3-pin XLR, Pin 2: hot / Pin 3: cold / Pin 1: ground
- Floating balanced outputs with automatic level compensation when working in unbalanced mode
- Output impedance: 150 Ohms balanced
- Output level: 0 dBFS corresponds to +12 dBu
- Frequency response: from 5 Hz to 44 kHz within 3 dB (96 kHz sample rate)
- Dynamic range: 100 dB(A)
- Channels crosstalk: 88 dB(A)
Stereo Output (unbalanced)
- Unbalanced, TRS 3.5 mm stereo Jack
- Output impedance: 150 Ohms balanced
- Output level: 0 dBFS corresponds to +12 dBu
- Frequency response: from 5 Hz to 44 kHz within 3 dB (96 kHz sample rate)
- Dynamic range: 100 dB(A)
- Channels crosstalk: 88 dB(A)
Headphones Output
- TRS 3.5 mm stereo Jack
- Output impedance: 22 Ohm
- Output level: 26 mW/channel (32 Ohm load)
- Frequency response: from 15 Hz to 44 kHz within 3 dB (96 kHz sample rate)
- Dynamic range: 100 dB(A)
Common
- AD and DA Resolution: 24-bit
- Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
- Power: USB bus power, battery power (4 x AA), DC power supply (9VDC) or external USB power supply (5VDC, 1A min)
- Device Connection: Mini-DIN
- Size: 166 mm / 6.54″ x 92 mm / 3.62″ x 43 mm / 1.69″
- Weight: 325 g / 0.72 lb (batteries excluded)
- Battery Life:
• Recording - Max load*: 1 hours, 30 minutes (Alkaline); 3 hours (NiMH rechargeable)
• Playback - Min load**: 2 hours, 30 minutes (Alkaline); 4 hours (NiMH rechargeable)
*Max load condition: four inputs connected each to a 1.6mA phantom powered load, input gains set to maximum, 32 Ohm headphones connected.
**Min load condition is as follows: music playing, phantom power OFF, 32 Ohm headphones connected.
Dimensions
- Size: 166 mm / 6.54″ x 92 mm / 3.62″ x 43 mm / 1.69″
- Weight: 325 g / 0.72 lb (batteries excluded)
iRig Mic XY***
- Type: Electret condenser
- Polar pattern: Cardioid
- Capsule size: 0.55”
- Frequency response: 20 Hz - 20kHz
- Sensitivity: -39 dB at 1kHz
- Equivalent noise: 22 dB (A-weighted)
- Max SPL: 145 dB SPL (@1% THD)
- Connector type: male 3-pin XLR
- Power requirements: 48V phantom power, <2mA (each)
- Dimensions (each): 55mm (H) x 19mm (Diam.)
- Weight (each): 37g
*** Included with iRig Pro Quattro I/O Deluxe
Package includes
-
iRig Pro Quattro I/O Deluxe
- iRig Pro Quattro I/O interface
- 1/4" thread adapter
- Lightning to Mini-DIN connection cable (60cm/23.62")
- USB-C to Mini-DIN connection cable (60cm/23.62")
- USB-A to Mini-DIN connection cable (60cm/23.62")
- 1x 2.5mm TRS male to MIDI female adapter (10cm/3.9")
- 4 x 1.5V AA Battery
- 2 x iRig Mic XY
- Windshield
- Power Supply Unit
- Carrying case
